Farm equipment needs to be properly maintained to get the most life out of it. If you fail to keep up with the latest farm equipment repair tips, then you might not know what needs to be done when things get a little off course with your equipment. Here at Bailey Heavy Equipment Repair Inc., we are all about showing people how to best take care of their equipment and what they might want to do to avoid running into some of the worst repair situations possible. The more you take care of your equipment ahead of time, the less likely you will need major repairs down the line.
Farm Equipment Repair and Maintenance Tips
Let’s talk about a few tips for how to repair and maintain your farm equipment so it doesn’t cause you any repair problems going forward. We believe that we have the best tips and advice for those who need a little help getting their farm equipment taken care of just the way that they need it, and we are happy to help anyone and everyone who feels that they could use the hand.
Spark Plugs
One piece of equipment that you can spend a little extra time with maintenance is the spark plugs for your farm equipment. You should remove the plugs from the equipment and keep them clean. You should check on this regularly to ensure there is no dirt and grime build-up on the equipment, and that it is functioning properly.
Replace the Batteries
Another thing that you can do to keep your equipment running as it is designed is to replace the batteries when they show signs of needing it. It is quite common for people to forget about the need to change out the batteries on their equipment regularly, and it is entirely possible that they will not take as much care as they should when it comes to replacing the batteries before the farming season begins. If you take care of it ahead of time, you won’t have to worry about the batteries giving out right when you need them.
Check on the Carburetor
Carburetors are a major part of any gas-operated farm equipment, and it is a good idea to peek under the hood of your equipment from time to time to check on how the carburetor is doing. You don’t want to simply assume that it will run just fine if that is not actually the case. You should make sure that you have a professional look at it if you have any concerns about its operational capacity. You do NOT want to assume that things are okay with it only to find out that this is not the case. Too many people have put themselves in that position before, and the results are disastrous. Do not do this or you will end up regretting that you did not take the carburetor issues more seriously before.
Welding is a fascinating and essential process for many businesses and companies. When something large breaks like a piece of machinery, it can be next to impossible to get it to the shop for repairs. That is where mobile welding comes in. This process makes repairs safer, easier and faster and can truly help any business.
How Does Mobile Welding Work? Mobile Welding Explained
In most cases, when we think about what does mobile welding mean, we can come up with a straightforward answer. A mobile welder is not tied down to a shop or a central location and can travel to worksites and other companies to help weld and repair items. Though this is a simple answer, they are so much more.
Mobile welders are most often a company that hires welders that have the skill to go to different worksites and work on a huge range of items, materials, and machinery to weld and repair it on the spot. A company like Bailey Heavy Equipment Repair hires welders with the experience and the know-how to work on a wide range of welds, materials, and machinery to serve customers.
A mobile welder is a huge asset, especially to those companies that have projects to be welded that are simply too large, heavy, or expensive to have shipped off to a workshop for repairs. Mobile welders have equipment that can travel with them to the area where the repair needs to be made.
Why Are Mobile Welders so Beneficial?
Mobile welding companies are a huge boon to any business or company that has large equipment, tight deadlines, or that simply cannot get their machinery or other items to a shop for repair. A great example would be a construction site with a large piece of equipment like a backhoe on site. The backhoe operator is working and doing a fine job and the arm becomes damaged. This piece of machinery weighs tens of thousands of pounds, meaning you’ll need a large flatbed to move it.
Mobile welders do a ton of different jobs on site. It will cost thousands to have large machinery shipped to a workshop for repair, and it will also delay the project greatly, costing more money on top of repairs and shipping costs. A mobile welder can bring their expertise and their equipment with them to the worksite, repair the backhoe on site for the cost of their travel and time, and get the project back on track.
Mobile welders take the very difficult and technical job of welding from the workshop where they are tied, to the field where they can do more good and can take on even more projects. A mobile welder is a fantastic professional, and having a trusted welding company can make choosing a mobile weld over shipping your items an easy choice.
Utility vehicles are a key tool in many industries and a common part of daily work activity. When you need new vehicles, there are many options to consider before purchasing a utility vehicle. What are some things to think about before you buy a utility vehicle? Ensure that the equipment you purchase fits your needs and is suitable for the industry you work in. Here are four factors to keep in mind.
1. The Environment You Work In
Utility vehicles have an assortment of uses, and depending on the nature of your work, the environment can vary. Environmental considerations can include the need for street legal driving, will you need off-road capacities, turning radius requirements, overall wear, accessory compatibility, and general use needs. You want your vehicles to be able to perform in the conditions you regularly encounter.
2. Drivetrain
Utility vehicles, like automobiles, have different drivetrain options to fit specific needs. In general, two-wheel and four-wheel drivetrains are the most common options. If your vehicles are mostly being used on smooth, even surfaces, two-wheel drive vehicles will likely suit your needs. However, if your business tasks involve off-roading, mud, bad weather, and generally hostile conditions, four-wheel-drive vehicles are more practical.
3. Fuel Type
The type of fuel your utility vehicles take is also an important consideration. Options include traditional gasoline, diesel, and electric options in some situations. Traditional gas utility vehicles run well, are quiet, tend to cost less than other options, and have good acceleration. The downside is they can require more maintenance and may offer less power than a diesel model. Diesel utility vehicles last a long time and offer high levels of performance. A downside is diesel utility vehicles can be louder and cost more upfront. Finally, electrical utility vehicles offer clean performance and less engine maintenance but are a newer technology and are not always a suitable solution.
4. Power and Performance
For utility vehicles, you have to keep your usage needs in mind. Factors to consider include towing power, cargo space, seating space, and payload capacity. Your utility vehicles need to offer the level of performance you need to do common daily business tasks. A vehicle that is too weak will result in more trips and work while an overpowered utility vehicle may be unneeded for your common tasks and a waste of resources and capital.
Final Thoughts
For every job, you need the proper tools. Your utility vehicles are as important as the tools found in your toolbox. By carefully researching your business needs, what tasks you need to perform, and vehicle specifics (fuel type and drivetrain), you can ensure your utility vehiclesare effective and cost-efficient.
For anyone interested in engineering, metalwork or building things by hand, a machine shop can be a magical place. This term does not refer to a place where machines are built but rather where machining is done. That can include making and repairing parts for machines.
One of the more fascinating aspects of this magical place is what kind of equipment is used in a machine shop.
Here’s a look at what different machines may be found in a machine shop and what they’re used for.
What kind of equipment is used in a machine shop?
There are many different types of machines that are in a machine shop. Some of the common machines include:
Lathe: A lathe is a very useful tool in a machine shop. It rotates the workpiece at very high speeds to perform a wide variety of tasks. This includes cutting, sanding, drilling, boring, turning, threading and more. These tools are one of the oldest types of machines and are found in machine shops that deal with everything from small parts to heavy duty machines.
Grinder: A grinding machine consists of a wheel with an abrasive surface that spins at high speeds. This machine can be used to sand down surfaces to smooth them out or to shape and flatten a component as needed. It can also be used to remove rust or paint from other parts for refurbishing.
Drill: A drill is one of the most useful tools in a machine shop. There are many different types of drills, but a standing drill (or drill press) is one commonly found in a machine shop. This is a large, heavy vertical drill that is controlled by a lever pulled by a technician to drill a hole on a piece that is laid flat on the drill’s work surface.
Saw: There are many different types of saws, and each has its own different uses. A band saw is a blade that runs like a belt and is used for cutting long pieces into the desired length and can do so in large quantities. A circular saw uses a round blade to cut through a variety of materials and can be found in a table-mounted or handheld style. A hacksaw uses a straight blade with many small teeth to cut through a variety of metals.
Shearer: When it comes to cutting sheet metal, a shearing machine is tough to beat. These do not leave chips or residual material, which reduces debris on the cutting floor as well as in the air in the machine shop.
This is but a small sample of the different machines that are in machine shops. When you need parts made or repaired, it’s likely that the job will require more than one of these tools. When you need professional machining done, reach out to the experts at Bailey Heavy Equipment Repair, Inc. today. We have a full-service machine shop and an experienced team that’s ready to help complete your next project.
Proper line boring is essential in making many types of machinery run smoothly, including engines of all types. This is a precise undertaking that requires exacting specifications, specialized equipment and lots of experience to get the job done right.
How does line boring work? Read on to find out more about what all goes into line boring.
Line boring, defined
There are many different types of line boring, but simply put, line boring can be boiled down to enlarging a hole that has already been cast in a piece of metal. The reason for this is to line up two holes and make them collinear.
This is common in machines like engine blocks, turbines, presses and more. If holes are misaligned or not collinear, the resulting vibration can cause the machine to shut down or malfunction in other ways.
Line boring process
Here’s how line boring works. First, the holes are lined up to their centers. Then a boring head is drilled through the holes to make their diameters even. This must be very precise and may require a variety of specialized tools.
Line boring can take anywhere from a few hours to multiple weeks. For complex jobs, an engineer may come out to the site and inspect the equipment that needs repair. Measurements will be taken and the tools needed will be identified and readied for use.
It might be the case that custom line boring needs to be done, especially if worn-out bores need to be returned to factory specifications. In this case, repair sleeves may need to be installed to decrease the size of a bore rather than widening another bore to match a worn-out one.
In the case of large machinery repair, line boring can be done on-site. This can be a cost-effective solution when compared to buying a new machine. It can also be much more efficient, as line boring work can often be completed faster than waiting for a new machine to be delivered and installed.
Why you may need line boring work
There are many reasons why line boring may be necessary for your equipment. Sometimes bore issues are the result of hydraulic pressure loss or just heavy use of the equipment over time. Other times, the bushings or bearings may have seized up, leading to bore damage.
Line boring can help restore worn-out or otherwise damaged or out-of-round bores. It can also help restore the correct bore alignment (this is often known as align boring). Line boring can also help change or correct bore centers or alignment.
The process of line boring is highly specialized and should always be performed by an experienced professional. When you need line boring or if you want to know more about what all goes into line boring before deciding if you need it done, get in touch with the team at Bailey Heavy Equipment Repair, Inc. today. We are ready to handle all your line boring needs in our shop or on-site for heavy machinery and equipment.
