Farm equipment needs to be properly maintained to get the most life out of it. If you fail to keep up with the latest farm equipment repair tips, then you might not know what needs to be done when things get a little off course with your equipment. Here at Bailey Heavy Equipment Repair Inc., we are all about showing people how to best take care of their equipment and what they might want to do to avoid running into some of the worst repair situations possible. The more you take care of your equipment ahead of time, the less likely you will need major repairs down the line.
Farm Equipment Repair and Maintenance Tips
Let’s talk about a few tips for how to repair and maintain your farm equipment so it doesn’t cause you any repair problems going forward. We believe that we have the best tips and advice for those who need a little help getting their farm equipment taken care of just the way that they need it, and we are happy to help anyone and everyone who feels that they could use the hand.
Spark Plugs
One piece of equipment that you can spend a little extra time with maintenance is the spark plugs for your farm equipment. You should remove the plugs from the equipment and keep them clean. You should check on this regularly to ensure there is no dirt and grime build-up on the equipment, and that it is functioning properly.
Replace the Batteries
Another thing that you can do to keep your equipment running as it is designed is to replace the batteries when they show signs of needing it. It is quite common for people to forget about the need to change out the batteries on their equipment regularly, and it is entirely possible that they will not take as much care as they should when it comes to replacing the batteries before the farming season begins. If you take care of it ahead of time, you won’t have to worry about the batteries giving out right when you need them.
Check on the Carburetor
Carburetors are a major part of any gas-operated farm equipment, and it is a good idea to peek under the hood of your equipment from time to time to check on how the carburetor is doing. You don’t want to simply assume that it will run just fine if that is not actually the case. You should make sure that you have a professional look at it if you have any concerns about its operational capacity. You do NOT want to assume that things are okay with it only to find out that this is not the case. Too many people have put themselves in that position before, and the results are disastrous. Do not do this or you will end up regretting that you did not take the carburetor issues more seriously before.
Farm equipment is a very pricey investment, and keeping it looking and working well is a must. When it comes to caring for your equipment, you may find yourself asking, “Is routine maintenance necessary for your farm implements,” and the answer is yes.
Why Is Routine Maintenance Important for Your Farm Implements?
Taking the time to have your farm equipment serviced and cared for on a routine basis is a must for a few reasons. Most farming equipment has an engine or a motor that requires that oil be changed and other elements that should be tended to. Making certain that the engines of your farm equipment are well cared for above all else is a must. Engines are one of the most expensive repairs for any piece of farm equipment. Routine maintenance helps catch small problems before they become larger ones.
As parts become broken or damaged, they should be repaired and replaced so that the piece of machinery can keep working properly — just like caring for your car helps keep it working well and ensures you get the most use out of it possible.
Taking the time to have routine maintenance done can help reduce the need for major repairs, prevent the need to replace entire pieces of machinery, and more. It is always best to protect your investment in any piece of machinery.
How Often Should You Service Your Farm Implements?
When it comes to a schedule for services, you should follow the recommendation of the manufacturer as it is going to be the most accurate and the most to date with when things need to be looked at. You should also take the time to really consider how the item is working for you and how it is behaving.
If you find that you are using your implement and there is some issue, it is always best to get the problem taken care of before it becomes a major issue than it is to wait and see if it resolves itself. Handling problems as they occur can help you greatly in terms of making sure that your implement is going to work and keep working well.
By making sure you check on your implements often, taking the time to get items repaired as they are damaged, and maintaining your implements, you can extend their life and usefulness and ensure that they are going to last.
Even though they’re bigger, utility vehicles like tow trucks, snowplows or any vehicle used for heavy hauling are designed to handle extreme loads and work in adverse conditions. However, they’re still susceptible to a variety of problems. Keep reading to learn the top issues that come with utility vehicles and how they can be avoided:
Poor fuel economy: Unlike passenger cars, a utility vehicle’s miles per gallon isn’t always considered during manufacturing. This leads to higher fuel costs, which is particularly problematic with higher diesel costs these days.
Brake wear: Some of the most common problems with utility vehicles are related to the truck’s braking system. Since they’re heavier, utility vehicles take a longer time to slow down, and the brakes have to work overtime to bring the truck to a stop. Crew members must be aware of the added braking time when they’re driving utility vehicles.
Uneven tire wear: Any car, SUV or pickup truck can have trouble with uneven tire wear, but this problem is more pronounced with heavy-duty utility vehicles. Uneven tread wear on individual tires or slight pulling indicates that the tires aren’t up to par and should be replaced.
Rollovers: Since they’re often top-heavy, utility vehicles can roll over when making sharp turns. While this is an issue on any roadway, the chance of a rollover gets even higher while driving on winding roads or in winter weather conditions.
Reduced visibility: Another safety problem that often comes with utility vehicles is reduced visibility. Blind spots behind the truck or having trouble seeing what’s in front of the vehicle can lead to collisions or a variety of workplace injuries.
How can these issues be avoided?
Thankfully, you can typically avoid the most common problems with utility vehicles. Follow these tips to keep every truck in your fleet in tip-top shape:
Schedule routine maintenance: The top way to prevent breakdowns with utility vehicles is to bring them in for routine maintenance. Along with preventing disasters, a regular tune-up can also help improve fuel economy. Consider bringing your entire fleet in for maintenance at once to ensure every utility vehicle performs its best.
Make repairs as soon as possible: It’s easy to ignore a slight problem with a utility vehicle or even a blinking dashboard light. However, turning a blind eye to issues leads to more expensive repairs in the future. Even though it means some added downtime, it’s best to bring your utility vehicle in for repairs when something’s amiss.
Use highly trained drivers: You can avoid issues like rollovers or accidents caused by reduced visibility by hiring properly trained and experienced drivers. It’s also a good idea to schedule routine training sessions, so drivers are always up to speed on the latest safety regulations.
Whether you’ve experienced any of the top issues that come with utility vehicles firsthand or you’d like to avoid them altogether, talk to the experts at Bailey Heavy Equipment Repair, Inc. We offer mobile utility vehicle repair within a 200-mile radius, and we’re available 24/7 to make emergency repairs.
Hydraulic systems are made of a variety of components. These include valves, filters, pumps and cylinders. Of these parts, the cylinders are one of the least complicated. Still, it requires specific knowledge to repair these components. Here’s what to do to repair a hydraulic cylinder.
How to repair a hydraulic cylinder
If you need to repair a hydraulic cylinder, use the following process. For assistance, don’t hesitate to contact your local hydraulic experts:
Preparation: Before you begin the repairs, you should start by cleaning the surface of the hydraulic cylinder. Disconnect all hoses and plugs. Then, drain the fluid from inside the cylinder.
Tools: For this repair, you’ll need a screwdriver, punch, pliers, seal kit, rubber mallet, torque wrench and emery cloth.
Steps: To repair a hydraulic cylinder, you must follow several steps. Start by disassembling the cylinder. Then, diagnose the cause of the failure. Next, repair or replace any damaged components. Lastly, rebuild the cylinder.
Tips for how to repair a hydraulic cylinder
As you complete the steps above, use the following tips. These will make the process go more smoothly and deliver optimal results:
Complete a thorough inspection: As you inspect the disassembled hydraulic cylinder, expand your inspection to the entire assembly. Check all components for wear and tear, not just the failed part.
Assemble the wear band: The hydraulic wear band guides the pistons. Be sure to assemble this band, also referred to as the guide ring or wear bush, to help reduce metal-on-metal contact in the cylinder.
Use the right tools: Keep in mind that metal tools will scratch the cylinder’s surface. This can cause problems with corrosion. Always use expert-recommended tools for these repairs. Consult with your local hydraulics shop for tool recommendations.
Handle with care: Handling cylinders with high-tension springs can be dangerous. If you are working on a larger cylinder, this can be particularly tricky. Be sure to handle with care, or ask an expert to make this repair for you.
Watch for bends: If rod seals fail prematurely, this often indicates there is a bend on the rod. You’ll need to take care of this issue as part of your hydraulic cylinder repair.
Use the right measurements: If you are replacing seals, keep in mind that seals expand or contract in response to environmental conditions. So, do not base the replacement seal on the measurement of the existing seal. Always go with manufacturer recommendations or consult with your local hydraulic system experts.
Why you might need to repair a hydraulic cylinder
Hydraulic cylinders may need repairs for one or more reasons. One of the most common reasons is damage of seals. This can occur due to corrosion, incorrect fitting or improper metalwork clearance. Fluid contamination is another potential reason for repair. Exposure to extreme temperatures can also cause failure and require repair.
Get expert repairs
For quality hydraulic cylinder repairs, contact the team at Bailey Heavy Equipment Repair, Inc. We have been serving customers throughout the area with top repairs since 1984. Call us today at 541-989-8505 with any questions or to schedule your on-site repair.
Hydrostatic drives, also known as hydrostatic transmissions, are used in a variety of applications across many industries. This type of drive is the transmission of choice when a hydraulic motor must be driven at variable speeds and offer bi-directional capabilities. Hydraulic drives are often found in mobile equipment, centrifuges, log cranes, conveyors and chemical washers. When this type of system breaks down, it requires specific methods of repair. But how exactly does hydrostatic repair work?
This is one of the most misunderstood transmission systems. Many of the components are enclosed in a pump assembly, so it can be difficult to understand how hydrostatic repair works. Here’s a quick overview to provide the insights you need.
Hydrostatic repair explained
Hydrostatic systems contain fluid. Any time fluid is located inside a container, it puts pressure on the walls of that container. Within a hydrostatic transmission system, the fluid puts pressure on the components. This is called hydrostatic pressure. Over time, this pressure can cause wear and tear on the system. Eventually, the hydrostatic system may need to be rebuilt.
When a rebuild is needed, experts in hydrostatic repair will complete a full rebuild process for the drive system. This process should include the following essentials:
Inspection: The components are disassembled and inspected by a qualified technician.
Cleaning: The technician will use solvent to clean each part and place it in a dust-reduced environment.
Calibration: The hydrostatic repair expert will check each component to make sure it meets manufacturer specifications. He or she will measure and calibrate each part to confirm it meets these standards.
Replacement: The technician disassembles all valves and rebuilds or replaces them as needed.
Reconditioning: Each part will be replaced, machined or reconditioned to bring it up to manufacturer specifications.
Rebuilding: The high-pressure manifold and the charge pump are rebuilt.
Sealing: The technician will replace O-rings, seals and gaskets. This should include a new shaft seal.
Checks: The technician will use a specialized tool to check the hydraulic drive for leaks.
Recording: The hydraulic expert will record all readings and quality levels and check them against manufacturer specifications.
Adjustments: Flow and pressure should be checked and adjusted to recommended specifications.
Filling: The technician will fill the hydraulic system with oil.
Painting: Lastly, the technician will paint the system and complete the finish with a quality seal.
Who does hydrostatic repair?
If you need hydrostatic repair, you need to entrust the job to experts who know how hydrostatic repair works. Look for professionals who have a track record of success in the industry. They should have experience with a variety of equipment and offer on-site repair for your convenience. For the best results, look for a locally-owned provider of hydrostatic repair services that puts its customers first.
Schedule hydrostatic repair today
For quality hydrostatic repairs, contact the team at Bailey Heavy Equipment Repair, Inc. Family owned and operated, we specialize in meeting all your hydraulic equipment repair needs. Our experts can provide on-site repair, machining, assemblies, sales and more. Reach us today at 541-989-8507 with any questions or to schedule your next repair.
