A hydraulic hose is critical for ensuring your machinery works as designed. The hose helps to provide the leverage needed to make heavy mechanical systems work.
Like virtually all components of modern machinery, a hydraulic hose does not last forever. You might wonder: Why perform hydraulic hose maintenance? The following should answer that question.
Make Your Equipment Last Longer
Maintaining hydraulic lines helps to ensure your equipment will work well and last as long as possible. Hydraulic systems put relatively little wear and tear on heavy equipment while greatly enabling your equipment to perform more work. When your hydraulic lines are in good condition, so is your heavy equipment.
Safety Benefits of Hydraulic Hoes Maintenance
A hydraulic line failure could be very serious and highly dangerous for workers. A sudden failure might cause your heavy equipment to drop a heavy load that could land on one or more workers or damage other equipment. A bad hydraulic hose also might leak fluid that might cause one or more workers to slip, fall, and suffer an injury.
Prevent Fire Hazards
Hydraulic fluid is flammable and could cause a flash fire if a hose were to fail and leak fluid. The fluid might leak onto an exhaust manifold, electrical wires, or maybe just a piece of equipment that occasionally causes sparks.
Just one ignition source might cause a catastrophic fire. Regular inspections, maintenance, and repairs as needed will help to ensure your hydraulic system is fully contained and will not cause a fire or any other problems.
Stop Air and Water From Entering the System
When air gets into a hydraulic system, it weakens the hydraulics and could render the system useless. That is because the air compresses instead of sending the pressure within the system to where it is supposed to go.
Poorly maintained hydraulic lines might develop hairline cracks and weakened connectors that enable air to enter the system. It also could let moisture collect and reduce the effectiveness of the hydraulic system.
Maintain Productivity Throughout the Work Day
When you have good hydraulics, your heavy equipment is less likely to fail. A good hydraulic system will enable your workers to keep doing their jobs while getting the most work done each day.
Bleeding the hydraulic lines after checking them for cracking, splitting, and other defects will help to make it work as well as possible and keep your worksite as productive as possible.
Contact Us To Schedule Heavy Equipment Maintenance and Repairs
Now that you have a much better idea of the benefits of hydraulic hose maintenance, you need experienced technicians to do the work. You can contact Bailey Heavy Equipment Repair in Lexington, OR, to inspect and repair your equipment’s hydraulic systems. We are the area’s best maintenance and repair services provider for heavy equipment.
The success of any line boring job will rely on some factors common to many machining tasks. That includes considerations like the types of line boring needed, which will often dictate the best line boring machine to use. For example, line boring typical automotive engines will have fewer demands on the line boring machine than line boring for heavy equipment engines.
Types of Line Boring
The differences in the demands of the different kinds of line boring jobs also equate to different types of line boring processes. High-speed steel and carbide are the line boring options machinists work with today, and each has its unique purpose and benefits.
Choosing the right line boring machine and the best line-boring option will require understanding how high-speed steel and carbide line boring works. The rudimentary concept is that high-speed steel works like a sharp-edged box knife, only strong enough to endure hard cutting surfaces (to a point).
Carbide, on the other hand, has been likened to a whittling knife designed to endure steady, constant, and repeated cuts. In most cases, carbide will be needed for the hardest surfaces or the deepest bores.
Types of Line Boring Tools
It doesn’t matter what type of line boring option you choose; there are also a few other line boring tools that you will want and need. From measuring diameter and height to adjusting the boring head or locating boring lines, the right tools will ensure the success of your line boring job.
A few tools that machinists rely on and that will help with your next engine repair or line boring job include:
Bore Measuring Tool
Micro-Adjust Boring Heads
Dial Indicator Set
Carbide Holder Set
Digital Bore Measuring Caliper
The right tools for the job will make any job easier. When it comes to line boring jobs, however, it isn’t only about being easier but more effective, accurate, and precise. That is also why Bailey Heavy Equipment Repair, Inc. is here, offering professional equipment repair services when it has to be right.
Bailey Heavy Equipment Repair, Inc.
Welcome to Bailey Heavy Equipment Repair, Inc. We are a family-owned and operated heavy-duty equipment repair service. Since 1984, we have been serving Lexington, Oregon, and the surrounding communities with friendly and professional equipment repair services.
We specialize in providing repairs and services for all your equipment needs, from farm equipment, utility equipment, trucks, cylinders, and more. We also offer on-site repair, line boring services, welding, machining, hose assembly services, steel sales, and other machine products. Contact us if you have any questions or to schedule a service call today.
Owning a utility vehicle is a great experience. If you don’t have one yet and are considering purchasing one, you can use this guide to learn about the benefits. Utility vehicles (UTVs) are a good choice for those who enjoy riding through the rocks and mud outdoors. Read on to learn about some of the benefits of owning a UTV.
What Are the Benefits of Owning a Utility Vehicle?
Here are some utility vehicle benefits you should know before you make that big purchase.
UTVs are versatile and can be used for various outdoor adventures. They are available in different sizes. You can find them available in two-seaters for those who just plan on riding solo. You can find them available in six seats for bigger family outings.
UTVs can handle different types of terrain, such as gravel, dirt, sand, mud, and rocks. It is easy for a regular 4×4 truck to get stuck in these things, including deep mud. But, with UTVs, not so much. You can easily drive right through them with no problems.
UTVs are exceptionally narrower than your average passenger vehicle. This allows them to fit into narrow spots. UTVs come in handy when passenger cars are just not able to perform.
If you and your family enjoy camping, your UTV will really come in handy on various trips. You can simply tow your UTV right on the back of your car or truck. When you arrive at your destination, simply park your vehicle and hop on your UTV. You can take your UTV out on different trails and enjoy all that nature has to offer.
UTVs also offer higher speeds for traveling through the mud. If you enjoy hunting, bring some of your friends along for the ride. UTVs are perfect for the entire family.
Another benefit of owning a UTV is that it offers a plethora of safety features. They are equipped with windscreens, seatbelts, and wide-set wheels to help with firmness.
UTVs also feature many compartments for storing your belongings, including equipment, tools, and hauling gear. UTVs can also be utilized on construction sites and for search and rescue purposes. Many sports teams even utilize them to transport equipment and players from one location to the next.
No matter why you choose to be outdoors, there is probably always a reason to bring your UTV in for the fun. They are easily accessible and suitable for any occasion.
Welcome to our blog. We are glad you found your way here. You will find interesting and valuable articles pertaining to our business and the services we offer. Continue to come back as our blog will be coming soon with updated articles.
In a world where time is money, productivity can be everything. After all, over the past few years, self-help books, blogs, and articles have been promoting methods of productivity for good reason. The more productive employees are, the more any business in any industry can grow and expand profits.
If you want to increase machine shop production and send shop productivity through the roof, there are a few tried and true tips to get you started.
We’ve listed the best suggestions for increasing machine shop production below, so read on to find out more!
Make sure to use reliable machines in your shop
As simple as it might sound, having reliable machinery is half the battle in increasing productivity in your shop. After all, if you constantly have to stop or slow production due to a faulty or unsafe machine, you will be wasting precious time and falling behind on your work.
Sometimes, getting reliable machines in your shop requires replacing older or less reliable machines with updated models. In other cases, a simple update to the equipment and basic fixes will keep your machines running like well-oiled machines. In turn, your shop will run like a well-oiled machine, too.
Choose simplified machinery for easy set up
One big time waster in machinery is choosing equipment that is too complicated for your needs. Having portable, automatically feeding, and properly clamping machines will make it so that you don’t have to worry about your machines running seamlessly.
Opt for the correct motor for high production levels
To produce faster, better, and more accurately, try to choose machines with a motor that is right for your needs and industry. Some machines work best with pneumatic motors, while others fare better with a hydraulic motor. Others still do their best when they are powered by an electric motor. Pay attention to overheating, sluggishness, and other signs of strain on the motor.
Waiting for a machine to cool down because it is running on the wrong motor can create issues with productivity in the short term and the long term. On the flip side, replacing the motor with the appropriate kind of motor can solve short-term and long-term issues, which increase productivity now and ten years from now.
Manage the floor in an organized manner
While this might seem like a no-brainer, plenty of shops lose out on possible productivity spikes because their floor is unorganized. From the machines to the staff, it pays to keep everything in order. Ensure that the floor plan has a natural flow that makes sense of the different aspects and stages of production. Minimize the time it takes for workers to move from one related station to the next to increase productivity. Most importantly, make sure that the floor’s laid-out system clears up any confusion.
Follow safety protocols
Simply put, a safe shop is a productive shop. When you can avoid injuries, you can increase productivity.
